DA22XLR-WP

Key Features

• Dante® network wall plate interface for 2 x audio inputs and 2 x audio outputs

• Converts 2 x balanced / unbalanced / MIC audio sources to Dante® audio channels

• Converts 2 x Dante® audio channels to balanced / unbalanced audio outputs

• Switchable 48V Phantom power for each MIC XLR input

• Adjustable MIC / line sensitivity from +24dBu to -28dBV for each XLR input 

• Adjustable line gain from +18 dBu to -10 dBV for each XLR output

• Supports: 44.1, 48 & 96kHz sample rates @ 24 Bit

• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)

• Supports AES67 RTP audio transport

• Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch

• Supports power via 12V DC adapter (not included) for when network switch does not support PoE

• Magnetic faceplate surround allowing for both UK & EU backbox compatibility

*Dante® is a registered trademark of Audinate Pty Ltd

Specifications

• Audio Input Connectors: 2 x Analogue balanced/unbalanced 3-Pin XLR connector 

• Audio Output Connectors: 2 x Analogue balanced/unbalanced 3-Pin XLR connector

• Network Connectors: 1 x PoE Dante® Ethernet Connection (RJ45)

• Configuration Switches: 4 x 5 position rotary dials (Sensitivity / Gain), 2 x Push button (48V Phantom power)

• Firmware  Upgrade: 1 x Micro-USB UART port

• Module Dimensions (L x W x H): 136mm x 76mm x 45mm (without faceplate)

• Faceplate Dimensions (L x W x H): 146mm x 86mm x 5mm

• Cut Out Dimensions (L x W x H): 109mm x 50mm x 36mm

• Mounting Hole Spacing: UK 121mm CTC, EU 60mm CTC

• Backbox Requirements: UK double gang backbox / EU double gang backbox

• Shipping Weight: 0.6kg

• Operating Temperature: 32°F to 104°F (0°C to 40°C)

• Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)

• Power Supply: Class 1 IEEE 802.3af POE PD or 12V/1A DC, 2-Pin Phoenix connector

Box Contents

1 x DA22XLR-WP
1 x Magnetic Faceplate
1 x Quick Reference Guide